Webinar library: Simulation

Watch recorded webinars and videos around Simulation. You can watch these at any time and learn more about the benefits of simulation for designers and engineers, and the use of different tools, like CFD and Nastran In-CAD.
Webinar library: Simulation
Round_Designing and Analysing.png

Designing and Analysing Offshore Containers/Baskets
More and more companies are now taking on simulation to help them optimise offshore containers before submitting for DNV 2.7-1 certification. This session will demonstrate how to setup and analyse a 4-point and a 2-point lift tests using Autodesk Nastran In-CAD.

Watch the webinar

 

Round_Indoor Air Quality.png

Indoor Air Quality - Human Comfort
CFD technology is now becoming more accessible to designers enabling them to simulate air flow and thus helping to design buildings with human comfort in mind. This session will demonstrate how to setup and analyse human comfort within a room using Autodesk CFD.

Watch the webinar

 

Round_Upfront Simulation.png

Upfront Simulation – Simulation within product design
Today engineers need to find the winning balance between cost, performance, and reliability all while working within a limited amount of time. This session will demonstrate how to setup and analyse several different designs side by side to see performance and effect of changes more easily.

Watch the webinar

 

Round_Electronic Cooling.png

Electronic Cooling – Electronic products and Datacentres
Within the field of electronic cooling, engineers and designers are faced with many challenges including smaller products, increasing performance, reducing costs and increased product lifespan. This session will demonstrate how to setup and analyse air flow and temperature results using Autodesk CFD.

Watch the webinar

 

Round_Valve Design.png

Valve Design – Predict pressure drops, avoid cavitation and erosion
Today engineers need to find the winning balance between cost, performance, and reliability all while working within a limited amount of time. This session will demonstrate how to setup and analyse several different designs side by side to see performance and effect of changes more easily.

Watch the webinar